
CONTESTOR XL™
INCREASED WEAR RESISTANCE DELIVERS LONGER BLADE LIFE
High speed steel edge wire increases tooth hardness for abrasive wear resistance
Chip controlling design reduces heat and wear
IMPROVED CHIP FORMATION HELPS PENETRATE DIFFICULT TO CUT MATERIALS
Variable tooth heights and multi-level set creates deeper, narrower chips
High Rake angles reduce cutting forces
OPTIMIZED DESIGN FOR STRAIGHTER CUTS ON LARGE BLOCKS
Shallow gullet construction increases beam strength
SPEED
LIFE
VERSATILITY
FINISH




Specifications
WIDTH x THICKNESS | TPI | ||||||
---|---|---|---|---|---|---|---|
IN | MM | 0.7/1.0 | 1.0/1.3 | 1.4/2.0 | 2/3 | 3/4 | |
1-1/4 X .042 | 34 x 1.07 |
|
• |
• |
|||
1-1/2 x .050 | 41 x 1.27 |
|
• |
• |
• |
||
2 x .063 | 54 x 1.60 |
|
• |
• |
• |
• |
|
2-5/8 x .063 | 67 x 1.60 |
• |
• |
• |
|
|
|
3 x .063 | 80 x 1.60 |
• |
• |
|
|
|
Applications
Primary
Solid Square / Rectangle
Sold Round
Plate
Secondary
Bundles
Tube
Angle Iron
Materials

Primary
- Mold Steels
- Stainless Steels
- Tool Steels
- Alloy Steels

Secondary
- Aluminum / Non - Ferrous
- Structural Steels
- Bearing Steels
- Nickel Alloys
- Carbon Steels
- Titanium
PRIMARY INDUSTRIES
SQUARE/RECTANGLE SOLID
LOCATE WIDTH OF CUT (W)
WIDTH OF CUT | ||
---|---|---|
IN | MM | TPI |
.1 | 2.5 | 14/18 |
.2 | 5 | 14/18 |
.3 | 7.5 | 10/14 |
.4 | 10 | 10/14 |
.5 | 12.5 | 8/12 |
.6 | 15 | 8/12 |
.7 | 17.5 | 6/10 |
.8 | 20 | 6/10 |
.9 | 22.5 | 6/8 5/8 |
1 | 25 | 6/8 5/8 |
2 | 50 | 4/6 |
5 | 125 | 3/4 |
10 | 250 | 2/3 |
15 | 375 | 1.5/2.0 1.4/2.0 |
20 | 500 | 1.0/1.3 |
25 | 675 | 1.0/1.3 |
30 | 750 | 1.0/1.3 |
35 | 875 | 0/7/1.0 |
40 | 1000 | 0/7/1.0 |
45 | 1125 | 0/7/1.0 |
50 | 1250 | 0/7/1.0 |
ROUND SOLID
LOCATE DIAMETER OF CUT (D)
DIAMETER OF CUT | ||
---|---|---|
IN | MM | TPI |
.1 | 2.5 | 14/18 |
.2 | 5 | 14/18 |
.3 | 7.5 | 10/14 |
.4 | 10 | 8/12 |
.5 | 12.5 | 6/10 |
.6 | 15 | 6/10 |
.7 | 17.5 | 6/10 |
.8 | 20 | 6/8 5/8 |
.9 | 22.5 | 6/8 5/8 |
1 | 25 | 6/8 5/8 |
2 | 50 | 4/6 |
5 | 125 | 3/4 |
10 | 250 | 2/3 |
15 | 375 | 1.5/2.0 1.4/2.0 |
20 | 500 | 1.0/1.3 |
25 | 675 | 1.0/1.3 |
30 | 750 | 1.0/1.3 |
35 | 875 | 1.0/1.3 |
40 | 1000 | 0/7/1.0 |
45 | 1125 | 0/7/1.0 |
50 | 1250 | 0/7/1.0 |
TUBING/PIPE/STRUCTURALS
LOCATE WALL THICKNESS (T)
WALL THICKNESS | ||
---|---|---|
IN | MM | TPI |
.5 | 1.25 | 14/18 |
.10 | 2.5 | 10/14 |
.15 | 3.75 | 8/12 |
.20 | 5 | 6/10 |
.25 | 6.25 | 6/8 5/8 |
.30 | 7.5 | 6/8 5/8 |
.40 | 10 | 4/6 |
.50 | 12.5 | 4/6 |
.60 | 15 | 4/6 |
.70 | 17.5 | 3/4 |
.80 | 20 | 3/4 |
.90 | 22.5 | 3/4 |
1 | 25 | 3/4 |
1.5 | 37.5 | 2/3 |
2 | 50 | 2/3 |